audiophony PREZONE642 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} audiophony PREZONE642. audiophony PREZONE642 13 pagina's. Multi-zone, mount-rackable mixer/preamplifier
Pagina afdrukkenPREZONE642 - Multi-zone, mount-rackable mixer/preamplifier
6 - Connectors
6.1 - Microphone inputs
The microphone inputs are accessible via XLR chassis and can receive both balanced and unbalanced low-level signals.
Both low-impedance condenser and dynamic microphones can be connected (channels 1 and 2).
Inputs 1 and 2 deliver a +18V voltage required for condenser microphones when the phantom power supply is activated.
CAUTION: Connecting unbalanced sources while the phantom power supply is activated will cause
severe damages to your devices due to the voltage delivered via pins 2 and 3.
1
3
3 = Coldspot (-)
6.2 - Line-level inputs
Mono line-level inputs are accessible via Jack or RCA chassis and can receive both balanced and unbalanced signals.
These inputs can be connected to CD players, MP3 players, Tuners or cassette players.
When connecting unbalanced sources, you will be required to connect the ring to the body.
You can also use the RCA inputs to connect CD or MP3 players, etc.
CAUTION: Turn the volume of affected channels at their minimum before connecting line-level signals
to prevent serious damages to your amplification system.
Sleeve
Ring
Corps
Balanced
2
1 = Ground
2 = Hotspot (+)
Balanced TRS
Ring
Coldspot (-)
Sleeve
Ground / Shield
Hotspot (+)
Tip
Unbalanced TS
Corps
Pointe
Pointe
Masse / Blindage
Signal
2
1
3
Shunt between
1 et 3 pins
Unbalanced TRS
Shunt between
ring and sleeve
Tip
Tip
Sleeve
Unbalanced RCA
Sleeve
Ground / Shield
Unbalanced
1 = Ground
2 = Hotspot (+)
Sleeve
Tip
Ground / Shield
Hotspot (+)
Ring
Center
Signal
English
Page 9