audiophony CUBsat4 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} audiophony CUBsat4. audiophony CUBsat4 16 pagina's. Cub series - mini line array system

Pagina afdrukken
ENGLISH
CUB series - Mini line array system
2 - Introduction
Creating a discreet sound system with both an attractive design and high-quality output regardless
of its location or usage is one of the hardest challenges to face.
This concept is appealing, for both permanent and temporary installations. Our CUBsat4 speaker
can be added to any regular multi-source installation, of course, but it can also be part of Line
Array columns thanks to its smart coupling and angulation system, with up to 8 speakers per
column.
Under this scenario, no need for a multitude of amplifiers or power sources since each speaker
features its own built-in cabling system: only one amplifier is required to power up both your
columns of 8 x CUBsat4.

3 - Quick start

When mounting a speaker onto any stand, always ensure that the stand is on a fiat, level sur-face,
with the legs fully extended. Be sure to check that the maximum load weight for the stands is
greater than the weight of the ARRAY SYSTEMS loudspeaker. Never use a stand with a maximum
load weight lower than the speaker. Do not attempt to mount more than one speaker on a stand
at one
time.
The ARRAY SYSTEMS loudspeakers are heavy. It is recommended that a second person to help
place the cabinet on a stand.
When the speaker is placed on a stand, always check the integrity and center of gravity of the
system
If the speaker can be tipped easily, or the pole is swaying, it is recommended that you lower the
height of the stand. Position the stand and route cables so that the performers and the audience
cannot tip over or trip on the system.
CUB-Wall1
CUB-Pole1
CUB-Pole1
CUB-BRACKET
CUB-Truss1
Page 4