DanPumps S-WN3 Installatiehandleiding - Pagina 3
Blader online of download pdf Installatiehandleiding voor {categorie_naam} DanPumps S-WN3. DanPumps S-WN3 9 pagina's.
2. Pump Labels
Sondex wet-end label
Example of Motor label
Technical informations subject to change without notice.
3. Applications
This installation and service manual are valid to the pump type S-WN series.
The series are manufactured in S-WN1, S-WN2, S-WN3 and S-W4.
The S-WN pumps are single stage, and non-self-priming pumps.
The pump is built as end-suction pump, and driven with a standard norm motor.
The pump is designed for pumping clean water, wastewater and waste water with contaminants.
Impeller model has different selections.
The S-WN can be delivered with other motor brand after choice.
Atex motor is an option
WARNING
The pumps must never be used in flammable or explosive media. If there are local restrictions concerning fire
risks they must be obeyed at all time. The pumps meet EU's machine directive, see declaration of conformity
at the back of this manual. DanPumps guarantees that the pumps' airborne noise level does not exceed the
noise level of 74 dbA (at normal operation).
WARNING
If people can get physical contact with the pump or the fluid that is being pumped at e.g. open excavations,
building sites or the like, a fault circuit-breaker (HFI or HPFI) must be mounted in the electrical installation.
If the pump is used in oceans, lakes etc. there must be a minimum safety distance of 20 meters between the
pump and any persons in the water. The national country and local standards has at all time to be observed
NOTE that in swimming pools there are special safety restrictions.
3