audiophony COMPACT500 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} audiophony COMPACT500. audiophony COMPACT500 12 pagina's. Amplified system with subwoofer and satellites-500w

Pagina afdrukken

English

7- Line output mode

Allows you to choose the signal injected to the outputs No. 4.

Left selector: The Line Out output only transmits the CH2 signal.

Right selector: The whole signal is transmitted from the system to the Line Out outputs.

8 - Balance

Allows you to adjust the distribution of the signal on the left and right satellites.

9 - ON/LIMIT signal indicator

Allows you to check on the volumes

(PLEASE MAKE SURE EACH CHANNEL IS CONFIGURED IN ORDER TO PREVENT THIS INDICATOR FROM BEING

LIT)

10 - Subwoofer sound level

The subwoofer volume can be adjusted separately. Use this knob to adjust it as desired. By default, the system is

balanced when this knob is in middle position.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT)

Mounting plate

Allows you to insert a 35 mm tube to pole-mount satellites. One of the tubes of the supplied speaker stand can be

used to mount your satellites.

Channels 1 to 3 DSP

This setting allows you to adjust the sound of each channel to meet your needs. When on the left, the sound is

very neutral and is perfect for vocal uses: basses and trebles are dimmed. In the middle position, the correction

remains neutral and respects the original source, toward the right, mediums are lowered while basses and trebles are

reinforced to produce a more dynamic output.

13 - Channels 1 to 3 input selector

Allows you to choose the type of source connected to each channel.

14 - Channels sound level

Allows you to adjust the sound level of each channel.

This setting also affects the main volume level of the amplification system.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT)

Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for

the audience, improper settings can damage your whole sound system.

The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.

CAUTION

Beyond this maximul level, the volume will not increase but will be distorted.

Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.

First, in order to prevent that, adjust the sound level via the Level of each channel.

Then, use the DSP to adjust the acoustic as you wish.

Finally, adjust the volume of the subwoofer.

If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems or

satellites in order to spread the sound output evenly.

Page 6

COMPACT500 - Amplified system with subwoofer and satellites -500W