Belden Hirschmann iVISOR DS85 Product Bulletin - Pagina 2
Blader online of download pdf Product Bulletin voor {categorie_naam} Belden Hirschmann iVISOR DS85. Belden Hirschmann iVISOR DS85 5 pagina's. Faceplate replacement
Pagina afdrukken3. Next, remove the four Phillips screws from the front of the console housing. Retain these screws; they will be
needed when you reassemble the console.
(Figure B)
4. Disconnect the wiring to the board assembly.
Ribbon
Cable
CAN
Cable
5. Using a 5.5 mm socket, remove the Fuse / Connector board. Once removed, retain all hardware. It can be
helpful to keep the hardware for each board separated with the boards as you remove them. This will make it
easier to use the correct hardware during reassembly.
(Figure C)
(Figure D)
Hirschmann Automation and Control
1540 Orchard Drive
Chambersburg, PA 17201
Document: 530117 - DS85 Faceplate Replacement
Power
Cable
Ground
Wire
Service : (717) 217-2250
Parts / Sales : (717) 217-2269
www.hirschmann-usa.com
Page 2 of 5