Dante DFG48044X Installatie- en bedieningshandleiding - Pagina 4

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Dante DFG48044X. Dante DFG48044X 18 pagina's. Digital fiber optic ethernet edge switch 10/100mbps standalone unit

Pagina afdrukken

LED Indicators (Front)

POWER: Steady ON when power applied

10/100: Steady ON for 100Mbps; OFF for 10 Mbps (copper ports only)

LK/ACT: Steady ON for LINK (LK) with no traffic, BLINKING indicates

port is transmitting / receiving (ACT).

F/H: Steady ON for full-duplex, OFF for half-duplex (Fiber port only)

Mean Time Between Failure (MTBF) – over15 years, Telcordia (Bellcore) Method

Agency Approvals and Standards Compliance:

UL Listed (UL 60950), cUL, CE, Emissions meets FCC Part 15 Class A.

NEBS L3 and ETSI compliant.

H and P models: IEEE P1613 Env. Std for Electric Power Substations

P models: NEMA TS-2 and TEES for traffic control equipment

P models: designed for UL 2043 above-the-ceiling installation

IEC61850 EMC and Operating Conditions Class C Power Substations

2.0 INTRODUCTION

This section describes DFG48044X Series models, including appearance, features and typical applications.

2.1 Inspecting the Package and the Product

Examine the shipping container for obvious damage prior to installing this product; notify the carrier immediately

of any damage which you believe occurred during shipment or delivery. Inspect the contents of this package for

any signs of damage and ensure that the items listed below are included.

This package should contain:

1 DFG48044X Series Edge Switch unit,

1 External Power Supply

1 set Metal panel mounting clips and screws (2 each)

1 User Guide (this manual)

Remove the DFG48044X Series Edge Switch from the shipping container. Be sure to keep the shipping

container should you need to ship the unit at a later date. In the event there are items missing or damaged contact

your supplier. If you need to return the unit, use the original shipping container. Refer to Section 5

Troubleshooting, for specific return procedures.

2.2 Product Description

DFG48044X Series Switches are designed as an Ethernet edge solution in heavy-duty industrial, military and un-

controlled temperature applications, as well as an economical solution for the growing requirements of managed

networks. DFG48044X, a six port versatile family of compact Edge switches, loaded with factory configurable fiber

options and AC/DC power input options with Alarm terminal block and innovative packaging is ready to serve the

needs of edge-of-the network applications.