3xLogic VX-2V-MD-RIWH Snelstarthandleiding - Pagina 16
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 3xLogic VX-2V-MD-RIWH. 3xLogic VX-2V-MD-RIWH 20 pagina's. Visix v-series all-in-one camera gen ii
Pagina afdrukken
2.
Confirm the PC is networked with the cameras then launch the utility. If properly networked, the utility
will automatically detect cameras on the network (click Refresh to refresh the list).
3.
Select the desired device from the list of available cameras.
4.
Click IP Setup and assign the desired IP.
5.
Fill out installer and company information.
6.
To activate the camera, you will be required to assign a complex password.
7.
Confirm the camera Live View preview is as desired and click Continue.
8.
Adjust any/all camera settings including the camera name and VIGIL Connect alias. Be sure to remember
the VIGIL Connect Alias as well as the username and password you assign to the camera. These
credentials will be required to add the camera to other VIGIL utilities.
9.
Fill out remaining information and complete steps in the setup tool to receive an installation summary
e-mail.
NOTE: The V-Series camera will automatically check for updates and format the SD card. Please allow
15 minutes before power cycling the camera.
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
V-Series Camera Quick Start Guide | VX-2V-MD-RIWH
16