Beldray EH0089 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Beldray EH0089. Beldray EH0089 15 pagina's. Conception wall fire

STEP 5: Drill where the holes have been marked, then insert the wall plugs.

STEP 6: Screw the wall brackets into place.

STEP 7: Hold the Conception Wall Fire above the brackets, leaning it against the wall

for support.

STEP 8: Carefully lower the Conception Wall Fire onto the brackets.

30 mm

Note: You will notice a slight gap behind the fireplace, this is normal as it is required for air ventilation.

Note: Do not cut the wire to fix the wiring to a wall socket, as this will invalidate your guarantee.

Mounting the Conception Wall Fire on a Separate Hearth

In order to avoid the possibility of the fire being accidentally lifted from its side mounting brackets

when the fire is mounted on a separate hearth, an additional bracket is provided.

STEP 1: Ensure that the Conception Wall Fire is unplugged from the mains power supply.

STEP 2: Open the fixing pack and place all of the contents into a container. This will reduce the

risk of losing any small pieces.

STEP 3: At the rear of the Conception Wall Fire at each side, there is a bracket (shown below).

These brackets engage behind the wall mounted brackets to provide a secure fixing method that

cannot be seen in normal use.

THE SCIENCE

BEHIND HEAT

EH0089 Conception Wall Fire