Consort CRX1 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Consort CRX1. Consort CRX1 2 pagina's. Single zone wireless controller

Pagina afdrukken

Set time and 7-day programme

day
programme number in
SETB & PROG mode
time for programme 1
temperature for
programme 1
programming options
1.
Touch and hold
for 5 seconds to enter the time setting.
2.
The minutes will flash.
3.
Tap
or
to set the minutes.
4.
To set hour, tap
and the hour will begin to flash.
5.
Tap
or
to set the hour.
6.
To set day, tap
and the day will begin to flash.
7.
Tap
or
to select the day.
8.
Tap
to access the 7-day programming mode.
9.
Tap
or
to select the day you want to set.
10. Tap
to set programme 1 for selected day.
This is indicated by the flashing number next to PROG.
11. Tap
or
to select the temperature setting you want to
program i.e. 1 to 6
12. Tap
to select minutes.
13. Tap
or
to set minutes.
14. Tap
to select hour.
15. Tap
or
to set hour.
16. Tap
to select temperature.
17. Tap
or
to set temperature.
Note: The programme is inactive if time and temperature are
showing dashes. Tap
once to activate the temperature
setting selection before you programme the time and
temperature.
In order to set the next temperature setting for the same day:
1.
Tap
until you reach the temperature setting options again.
2.
Tap
or
to select the next temperature setting for the
day.
3.
Then follow steps 8 to 13 above.
To set temperature settings for a different day:
1.
Navigate by tapping
until the selection for day is flashing.
2.
Then, follow steps 5 to 13 above.
Tip: You can copy a day's heating schedule by using the "COPY
DAY" option in programming mode.
Note: Once you are happy with the settings, leave the thermostat
for 20 seconds or tap and hold
for 5 seconds. The settings will
be saved and CRX1 will return to the main screen.

Copy day heating programme

The CRX1 allows you to copy a day's heating programme to save
time re-entering the temperature settings for a day.
1.
Touch and hold
for 5 seconds to enter the time setting.
2.
The minutes will flash.
3.
To skip time setting, tap
to cycle through hour and day.
4.
On the next tap, the Programme mode is activated and the day
will flash.
5.
Tap
to activate the COPY DAY function.
6.
Tap
to select the day you want to copy the temperature
settings from.
7.
Tap
or
to select the day you want to copy the temperature
settings to.
8.
Tap
to confirm the selection.
The 'to' word will flash to indicate that the day programme has
been copied to the day selected.
9.
Tap
to go back to the Programme mode.

Set programme inactive

To deactivate a programme, enter the programming mode. Select
the programme you want to make inactive and tap
temperature will now be dashes to indicate that the programme has
been deactivated. In order to re-activate the temperature setting,
tap
again.

Operation modes

CRX1 has 4 operating modes: BOOST, MANUAL, SET BACK and
PROGRAM. Each mode can be selected by activating the CRX1 and
tapping
to cycle through the options. The cycle sequence will
always start with BOOST mode followed by MANUAL, SET BACK and
PROGRAM.
15-Minutes Boost mode - BOOST
The boost feature regulates your heating to increase the room
temperature to provide the maximum comfort quickly.
1.
To activate Boost feature, tap
twice.
2.
The Boost mode will show above the current temperature and
the 15-minutes timer will flash.
3.
Tap
or
to set the temperature.
4.
Once the temperature is set, wait for a few seconds for
flash.
5.
The heating is now in Boost mode.
To amend the set temperature, tap any control button once to
activate, then tap
or
to change the temperature. Once the
temperature is set, you can leave the thermostat and the settings will
be saved. After 15 minutes, the CRX1 will return to normal operating
mode.
Manual mode - M
In manual mode, the heater maintains the set temperature.
1.
To activate manual mode, tap
twice.
2.
Tap
to cycle through to MAN operating mode.
3.
Tap
or
to set the temperature.
To amend the set temperature, tap any control button once to
activate, then tap
or
to change the temperature. Once the
temperature is set, leave the thermostat and the settings will be
saved.
Setback mode - SETB
The setback feature lowers all set temperatures in the 7-day
programme by a set value.
1.
To activate setback mode, tap
to cycle through to SETB operating mode.
2.
Tap
3.
Tap
to decrease the temperature.
Programme mode - PROG
In this mode, the CRX1 will follow the day programme. You can
override the temperature in PROG mode by simply activating the
CRX1 and using the
temperature set will then be maintained until the next temperature
setting for the day kicks in.
Fan function
Tap any control icon to activate the CRX1. Tap
deactivate the fan function.
. The time and
Advance mode
from SETB or PROG mode to bring forward next programme.
Tap
To clear advance mode, tap
Locking CRX1
Tap and hold
together for 5 seconds. Repeat the step to
unlock CRX1.
Should you need any advice on the use of your new Consort
product, or should you require service or repair, please contact our
Tel: 01646 692172
The CRX1 is guaranteed for one year against faulty material or
workmanship. This applies only if the appliance has been used for
purposes in accordance with the instructions provided and has not
to
been misused, neglected, damaged, modified or repaired by any
person not authorised by us. This guarantee is offered to you as an
extra benefit and does not affect your legal rights.
Registered Office: Thornton Industrial Estate, Milford Haven,
Technical enquiries: [email protected]
BS EN ISO 9001 Registered Company No FM12671
Reasonable care has been taken to ensure that this guide is
accurate at the time of printing. In the interest of progress the
Company reserve the right to vary specifications from time to time
twice.
or
icon to adjust the temperature. The
to activate or
.
Customer helpline
Helpline:
Fax: 01646 695195
Consort Equipment Products Ltd.
Pembrokeshire, SA73 2RT
Tel: 01646 692172
Fax: 01646 695195
Sales enquiries: [email protected]
without notice.