Consort EV2310 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Consort EV2310. Consort EV2310 16 pagina's.

10. Enter the desired power limit

and press :

METHOD 1|1

150

This limit is automatically set to

maximum and cannot be changed in case

of a voltage gradient step:

12. Enter the desired timer value

and press  :

METHOD 1|1

00:30

The value format is 'hh:mm' when

entering a value in hours, a value with 2

decimals when entering kiloVolthours.

14. Press / to start the experiment.

At any time, you can return to the main menu by holding  pressed.

•

At any time, you can avoid programming unnecessary parameters. To do so, simply press / instead of 

•

after entering the last relevant value and the instrument will immediately start the experiment keeping the

other parameters to their previous values.

To ensure that the desired parameter is kept constant, we suggest to pre-set all other parameters to its

•

maximum.

A blinking unit of the controlling parameter appears when the regulation is complete.

•

The timer will always count down except when no timer value has been entered.

•

Rev. 1605

POWER

TIMER

11. Enter the desired timer unit (h or kVh)

and press  :

METHOD 1|1

TIMER UNIT

13. Decide if the experiment should

automatically proceed with a next step,

press  :

METHOD 1|1

END METHOD

Choose NO to resume at point 6 with the

next step, choose YES to stop after this

step.

Manual Power Supplies