AUDIOPROF REVAMP2150 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AUDIOPROF REVAMP2150. AUDIOPROF REVAMP2150 16 pagina's.

REVAMP2150
Do not use the unit if the electrical power cord is frayed or
broken.
Always operate the unit with the AC ground wire connected to
the electrical system ground.
Set level controls on amplifiers all the way down during power-
up to prevent speaker damage if there are high signal levels at
the inputs.
Do not connect the inputs / outputs of amplifiers or consoles
to any other voltage source, such as a battery, mains source, or
power supply, regardless of whether the amplifier or console is
turned on or off.
Power down & disconnect units from mains voltage before
making connections.
Do not use the unit near stoves, heat registers, radiators, or
other heat producing devices.
Do not operate equipment on a surface or in an environment
which may distort the normal flow of air around the unit. If the
unit is used in an extremely dusty or smoky environment, the
unit should be periodically "blown free" of dust.
Do not remove the cover. Removing the cover will expose you
to potentially dangerous volt ages.
Do not drive the inputs with a signal level higher than that
required to drive equipment to full output.
Instruction manual
5