Cassida Zeus Servicehandleiding - Pagina 5

Blader online of download pdf Servicehandleiding voor {categorie_naam} Cassida Zeus. Cassida Zeus 13 pagina's. 2-pocket currency discriminator

2. If CIS is defective then in Service Menu -> [1] Diagnosis -> [5] Scanning Quality

-> [4] Scanned Image the image may looks similar to [Fig. 3] below. In this case

replace the CIS sensor.

3. CIS or Main board issues may manifest (as shown above

CassidaPRO Zeus: Service Manual

cassidapro.com/partner/

A.) Power off unit

B.) Connect a new CIS to the MAIN board

C.) Place the CIS on a table or ﬂat surface with a bill between the CIS and the

table.

D.) Turn on the power and go into the Service Menu -> [1] Diagnosis -> [5]

Scanning Quality -> [4] Scanned Image

E.) Count a bill. The machine reads an image from the new CIS on the table

rather than the CIS in the machine

F.) If the image looks like [Fig. 1] with an abnormal colored image of RGB

and IR R then it means the MAIN board is functioning correctly

i.) Replace the CIS which is currently installed in the machine

G.) Otherwise if the image looks like [Fig. 4]

ii.) Replace the PBA_MAIN board

H.) Calibrate CIS (R) and CIS (T) once unit is reassembled

READ/ID ERRORS

[Fig. 3]

5.2.

[Fig. 2]

Rev: 09/05/2018