CONSTRUCTA CK 612 Series Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CONSTRUCTA CK 612 Series. CONSTRUCTA CK 612 Series 16 pagina's.

Pagina afdrukken

Observing ambient

temperature and

ventilation

The climate class can be found on

the rating plate. It states the room

temperature within which the appliance

can be operated. The rating plate is

situated in the bottom left hand side

of the appliance.

Climate class

Ventilation

The air on the rear panel of the appliance

heats up. Conduction of the heated air

must not be obstructed. Otherwise,

the refrigeration unit must work harder.

This increases power consumption.

Therefore: Never cover or block ventilation

openings!

Permitted ambient

temperature

+10 °C to 32 °C

+16 °C to 32 °C

+16 °C to 38 °C

+16 °C to 43 °C

Switching

the appliance on

Press On/Off button, Fig. 2/2, green and

red indicator lights are lit.

Switching off the warning

signal

(not all models)

Press the alarm button. Fig. 2/4

So that the signal can continue to warn

of a malfunction, press the warning off

button again after the red indicator lamp

goes out.

Setting the temperature

Set the temperature selector, Fig 2/1,

on to a number. The higher the number,

the lower the temperature. We recom

mend a medium setting (of e g. 2-3).

Note

S If you cannot open the freezer

compartment door immediately after

closing it, wait 2 3 minutes until the

partial vacuum has equalised.

S The refrigeration system may cause

several areas of the freezer shelves

to frost quickly. This does not affect

function or power consumption. The

appliance does not require defrosting

until the entire surface of the freezer

shelf is covered with more than 5 mm

of frost or ice.

S The sides of the housing are sometimes

heated slightly. This prevents conden

sation in the area of the door seal.