Danzco DH0070 14G Bedienings- en onderdelenhandleiding - Pagina 5
Blader online of download pdf Bedienings- en onderdelenhandleiding voor {categorie_naam} Danzco DH0070 14G. Danzco DH0070 14G 16 pagina's. Connect and cut hydraulic chain saw
Pagina afdrukkenAfter assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height
with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).
Hydraulic Connections
3B
The hydraulic requirements to operate the saw are 13 to 15 gallons per minute at 2000 psi from a directional
control valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool
that will work.
shows hose connections for correct operation.
Fig. 4
The hydraulic valve can be manual or electric control. Figure 5
Fig. 5
5