Contacta IL-K200 Installatie- en gebruikershandleiding - Pagina 7

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Contacta IL-K200. Contacta IL-K200 12 pagina's. "under the counter" loop kit

Pagina afdrukken

Initial Set-Up

Once installed, volume adjustments are not needed as the driver

self-adjusts; the system is ready to operate. Please ensure you test the

loop using one of our loop listeners.

The Loop Driver

The driver has no buttons on the front panel. Please see below an

overview of the indicators on the front panel of the HLD2 driver.

1. Power LED:

Solid green when correctly powered.

Flashes green once every 25 seconds when in "Power Save" Mode.

Solid red when incorrect power supply connected.

2. Input LED:

Flashes green when microphone is operating correctly.

Solid red if microphone is faulty or no input detected.

3. Output LED:

Flashes green when loop output is functioning correctly.

Solid red when aerial is faulty/disconnected.