Contacta IL-PL20 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Contacta IL-PL20. Contacta IL-PL20 12 pagina's. Portable loop
Ook voor Contacta IL-PL20: Installatie- en gebruikershandleiding (12 pagina's)

Pagina afdrukken

1. Setting up

Charging the Portable Loop

It is important to fully charge your unit once you have received it.

Plug the power supply in to the mains socket.

2. Connect the power supply lead to the the rear of the Portable Loop

using the socket marked "Power". The status light will then rapidly

flash red.

3. The status will turn a steady red when the unit is fully charged.

Setting up the Portable Loop

Hearing device

wearer

Place the Portable Loop on the desk or counter top between the

hearing device wearer and the member of staff.

2. Ensure the rear of the unit, with the in-built microphone, is facing

the staff member, as shown below.

3. The front of the unit, with the "T" position label, needs to face the

person wearing the hearing device.

4. Slide the switch on the left hand side of the rear of the unit to the

"ON" position. The system is now ready to use.

EXT

Setting Up

MIC

Staff member

Status light