DAPAudio D-100 Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} DAPAudio D-100. DAPAudio D-100 12 pagina's.
Pagina afdrukken
D-100/H-100
Troubleshooting
No Sound
Always check if all the cables and cords are connected. Always turn off power to the area before
checking the wires, to prevent electric shock.
If everything works properly and there is still no sound, revisit the manufacturer's instructions to make sure
they were followed during installation. If everything was installed correctly and there is still no sound, you
may want to consider bringing in a professional to take a look at your speakers.
Sound Warping
If the sound coming out of your loudspeaker is loud enough, but seems to be warped or distorted, your
treble or bass levels may need to be adjusted.
Too much treble can make the sound bounce off of fixtures in the room, making it tinny sounding.
With the bass, if the loudspeaker is too close to a wall and is not aimed properly, then you will need to set
the bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.
Product Specification
Driver (D6547D)
Input voltage:
Power consumption:
Frequency response:
Sensitivity (1W/1M):
Power taps:
Housing:
IP rating:
Dimensions:
Weight:
Horn (D6547H)
Material:
Dimensions:
Weight:
Design and product specifications are subject to change without prior notice.
Ordercode: D6547D/D6547H
100V AC, 50/60 Hz
100W
150~6 kHz
100 dB
50W/100W
Aluminum
IP66
145 x 145 x 173 mm (LxWxH)
3,9 kg
Aluminum
515 x 515 x 370 mm (LxWxH)
1,9 kg
Website:
www.Dap-audio.info
Email:
7