Contacta IL-CONTACTA-FSM Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Contacta IL-CONTACTA-FSM. Contacta IL-CONTACTA-FSM 12 pagina's. Field strength meter

Pagina afdrukken

Line In Flat Response Mode:

On the top of the unit is a new feature, audio dBV level. The readings

and the display help determine what level of signal is Coming from the

house feed. Levels between -10dBV and +4dBV are considered to be

line level signals. A poor loop system sound often comes from a very

low level building feed. This input uses the last mode on the FSM and

displays an accurate level which can then be demonstrated to the

building. We advise a level between -10dBV and 0dBV.

To use this feature cycle through the various mode un-til you see Line

In Flat Response on the display. Now connect up the XLR adapter

which has an XLR female on one end and an 1/8" TRS connector on the

other end. If you wish to make up your own adapter use the following

information:

1/8 in TRS connector

Tip

Ring

Sleeve

----------------------------------------

XLR female connector

Pin 2

Pin 3

Pin 1

Met

Turnin

On -

Off -

Select

When

press

B" Bu

•