Audiovalve BALDUR 300 Instructie - Pagina 4
Blader online of download pdf Instructie voor {categorie_naam} Audiovalve BALDUR 300. Audiovalve BALDUR 300 17 pagina's. High power, high current class -a triode amplifier
Pagina afdrukkenBALDUR 300
triode power amplifier
WARNING
This amplifier Baldur 300 operates in class - A and is
therefore capable of generating a moderately high temperature which
requires care full placing to aviod any effect this heat may have on other
equipment, funiture and fittings etc.
Do not remove the top cover from this amplifier.
Hazardous voltages are present. Any repair work should
be refer to a suitable qualified and experienced
service person.
Do not attempt to connect any input of this amplifier to
any of its outputs.
Do not earth any output terminal or connect any of these
terminals together without following the instructions in
this manual or seeking qualified assistance.
Do not place this amplifier in any position where liquids
or any foreign material may accidentally enter it.
Do not disconnect any in / output wire, while the amplifier is
operating.
Do not connect any voltage source short circuit, earth / ground or
appliance (other than suitable HiFi quality loudspeakers ) to any output
terminal.
Some preamplifiers, processor, CD players etc produce
large switching pulses when switched on, causing a loud
click through the loudspeakers. For this reason, turn on
all other equipment in your system before turning on the
Baldur 300.
Note: the Baldur 300 power amplifier do not cause this problem.