DAPAudio Vision 3500 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} DAPAudio Vision 3500. DAPAudio Vision 3500 18 pagina's. Vision mkii series high power stereo amplifier
Ook voor DAPAudio Vision 3500: Producthandleiding (16 pagina's)

Pagina afdrukken

Frontpanel

1. "CLIP" Indicator

Any illumination of the clip LED indicates distortion. In this case, check the output signal of your mixer

and turn down the input gain control. Please keep in mind that the power amplifier cannot correct

any distortion.

2. LED "STAND BY"

This indicator lights when you switch your power amplifier on and stays illuminated for a few seconds

(during this time the power amplifier makes an auto-test). When the LED dims, it means the power

amplifier is ready to work.

3. "SIGNAL" Indicator

The illumination of the LED indicates a safe operation.

4. Air vents

Don't obstruct or insert objects into air vents.

5. Channel 1 Volume Control

In stereo mode, this potentiometer allows the adjustment of the channel 1 input level. (left channel ).

In Bridge mode, this potentiometer allows the adjustment of the two channels at the same time.

6. "POWER" Indicator

This indicator lights when the power amplifier is switched on.

Fig. 1