Addonics Technologies UDFHNVM7 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Addonics Technologies UDFHNVM7. Addonics Technologies UDFHNVM7 2 pagina's. 1:7 nvme/flash/hdd duplicator
Pagina afdrukken
Front view
Connect the 8 NVMe to the USB adapter on the Compact USB duplicator as
shown in diagram above using the included USB-C cables and the USB-A
male to USB-C adapters
Rear view
www.addonics.com
Package content:
•
1:7 Compact USB duplicator main
unit (model: UDFH7-E)
•
NVMe docking station with eight
(8) NVMe SSD to USB 3.1 adapter
(model: M2NVM8DS)
•
One power cord
•
Eight (8) 12" USB – C cables
•
Eight (8) USB-A to USB-C adapters
(model: ADU3MUCF)
•
One aluminum enclosure, screw
drive and a set of screws (for using
the NVMe SSD to USB 3.1 adapter
as an external USB drive)
•
This quick start user guide
•
Compact USB duplicator controller
user guide
Technical Support (M-F 8:30am - 5:00pm PST)
Loading NVMe SSD onto the docking station
Step 1
Step 2
Attaching the NVMe SSD to the duplicator
1. Turn off the duplicator
2. Install the NVMe SSD into each adapter on the docking station as shown
in the diagram above. There is no special tool required. The NVMe SSD is
temporary secured in the adapter by the hold down clip on the side of
the adapter.
3. Connect the adapter with the source SSD to the source USB port and the
adapters with the target SSDs to the target USB ports on the USB
duplicator, using the USB-C cables and the USB-A male to USB-C adapters
that come with the unit. (see the Front View diagram for reference)
4. Power on the duplicator. Wait for the LCD display to indicate the # of
devices detected and press the OK button to start the duplication.
Phone: 408-453-6212
Email. www. Addonics.com/support/query/