Duratech DLC-010 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Duratech DLC-010. Duratech DLC-010 11 pagina's.

Pagina afdrukken

Calibration

During calibration, the 'open' and 'close' position of the DuraCover System

are saved in the memory of the DLC-010. After this calibration, the user can

open and close the cover safely without crossing the end positions.

Step 1: Bring cover to the OPEN position

OFF

1. Set slide switch CALIBRATION: OFF

2. Set slide switch FORCE: ON

Step 2: Bring cover to the CLOSED position

OFF

1. Set slide switch CALIBRATION: ON

2. Set slide switch FORCE: OFF

Step 3: Save

OFF

1. Set slide switch CALIBRATION: OFF

2. Set slide switch FORCE: OFF

3. Use the keyswitch to move the cover

to the desired OPEN position

3. Use the keyswitch to move the cover

to the desired CLOSED position

3. When the calibration is succesfull, the

status LED will become green

Correction

During correction, the 'open' and 'close' position can be updated without

restarting the full calibration process. This function is only possible if a cali-

bration was already done before

When the 'open' position is corrected, the 'close' position is changed accord-

ingly (and the other way around).

Procedure:

Set the FORCE slide switch to ON, in case the cover needs to move

beyond the current calibration limits. (Calibration slide switch can stay

OFF)

2. Use the keyswitch to move the cover to the correct OPEN or CLOSED

position.

3. Set slide switch CALIBRATION: ON

4. Set slide switch CALIBRATION: OFF

5. When the calibration correction succeeded, the status LED will become

green.

Dead Man Switch settings

DIP switch 2 & 3 can be used to activate Dead Man Switch mode (DMS*):

1 2 3

Flip the desired DIP switch to the ON position, to activate the designated DMS

mode.

*Dead man switch (DMS) mode is a working mode that requires the user to keep controlling the

open or close switch while operating the cover. When the control is released, the cover move-

ment stops immediately.

DIP switch 3: DMS to CLOSE cover

DIP switch 2: DMS to OPEN cover