DAPAudio IMIX-7.3 Handmatig - Pagina 12

Blader online of download pdf Handmatig voor {categorie_naam} DAPAudio IMIX-7.3. DAPAudio IMIX-7.3 16 pagina's. 7 channel 2u install mixer

Pagina afdrukken
DAPAudio IMIX-7.3 Handmatig
IMIX 7.3
43. Mic 2 combo input connector
Depending on what's most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.
44. Mic 1 combo input connector
Depending on what's most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.
45. Channel 2 line/phono switch
Used to set the input level for the channel 2 phono-line (55) inputs at either phono or line level.
46. Channel 1 line/phono switch
Used to set the input level for the channel 1 phono-line (56) inputs at either phono or line level.
47. Record RCA unbalanced out connector
Use these to connect a recording device.
48. Master 3 XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
49. Master 3 RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
50. Master 2 XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
51. Master 2 RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
52. Master 1 XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
53. Master 1 RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
54. Channel 5 RCA line input connectors
Use to connect a line level device. You can select one of two the Line inputs with the corresponding line
select (15) button on the frontpanel.
55. Channel 4 RCA line input connectors
Use to connect a line level device. You can select one of two the Line inputs with the corresponding line
select (15) button on the frontpanel.
56. Channel 3 RCA line input connectors
Use to connect a line level device. You can select one of two the Line inputs with the corresponding line
select (15) button on the frontpanel.
57. Channel 2 RCA line/phono-line input connectors
Use the line input to connect a line level device. Depending on the position of the phono/line selector
(45), you can connect either a line level device or a turntable to the phono-line input.
58. Channel 1 RCA line/phono-line input connectors
Use the line input to connect a line level device. Depending on the position of the phono/line selector
(46), you can connect either a line level device or a turntable to the phono-line input.
59. GND screw
Use to connect the ground wire of your turntable.
Ordercode: D2351
11