DAPAudio MMIX-4 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} DAPAudio MMIX-4. DAPAudio MMIX-4 15 pagina's.

Pagina afdrukken
DAPAudio MMIX-4 Handmatig

Frontview

Fig. 2
1. Channel 1 level control
Use this control to adjust the level of channel 1.
2. Channel 2 level control
Use this control to adjust the level of channel 2.
3. Channel 3 level control
Use this control to adjust the level of channel 3.
4. Channel 4 level control
Use this control to adjust the level of channel 4.
5. Output L/R signal VU meter
This meter is a multi-step LED; respectively the green LEDs show -20, -5 and 0dB. red LEDs show +6 and +20
dB. The red LEDs should only blink occasionally during loud passages. If the red LEDs light up frequently
you have to lower the Level (1, 2, 3, 4) controls.
6. Channel 1 Combo input
Electronically balanced Combo-type input. Accept either XLR or Jack inputs. Due to the wide range of
the level (1) control this input can be used for microphone level up to line level devices.
7. Channel 2 Combo input
Electronically balanced Combo-type input. Accept either XLR or Jack inputs. Due to the wide range of
the level (2) control this input can be used for microphone level up to line level devices.
8. Channel 3 Combo input
Electronically balanced Combo-type input. Accept either XLR or Jack inputs. Due to the wide range of
the level (3) control this input can be used for microphone level up to line level devices.
9. Channel 4 Combo input
Electronically balanced Combo-type input. Accept either XLR or Jack inputs. Due to the wide range of
the level (4) control this input can be used for microphone level up to line level devices.
10. Power LED
Indicates that the unit is powered on.
11. Channel 1 pan control
By using the panorama control you can change the input signal's position within the stereo image. When
the panorama control is set to center position, the audio signal is equal for both the left and right output.
12. Channel 2 pan control
By using the panorama control you can change the input signal's position within the stereo image. When
the panorama control is set to center position, the audio signal is equal for both the left and right output.
7