DAPAudio COM-52 Producthandleiding - Pagina 10

Blader online of download pdf Producthandleiding voor {categorie_naam} DAPAudio COM-52. DAPAudio COM-52 19 pagina's.

Frequency Set Menu

Press SET, the LCD shows:

after a second the display shows:

You can now change the frequency with the UP / DOWN buttons (steps of 0.025 Hz to change the

frequency). To confirm you have to press SET. If you don't press SET, the LCD display will keep flashing.

System Lock Menu

If the receiver is locked, all menu settings (Channels, Sensitivity, Indicator Solution and Power switch) can

not be changed.

If the receiver is in locked status LOC OFF, you can change all the menu functions.

Note: Which screen is shown, depends on your previous setup

LOCK OFF to LOCK ON

Scroll through the menu by using the SET button, until the LCD shows:

after a second the display shows:

With the UP button, you can change the original state from LOC OFF to LOC ON; the LCD will keep

flashing.

Press SET to store the setting, the device is locked. After pressing SET, the LCD will stop flashing.

LOCK ON to LOCK OFF

If the receiver is in locked status LOC ON, you can't change the current working state and you can't turn

off the device. The LCD shows:

When the device is in LOCK status, press the SET button to enter the lock state. Now you can change the

state to LOCK OFF by pressing the DOWN button, the LCD will keep flashing. Press SET to change the

setting, the device is unlocked. After pressing SET, the LCD will stop flashing.