Duratool D03214 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Duratool D03214. Duratool D03214 8 pagina's. 18v cordless hammer drill

CHARGING THE BATTERY PACK

Note: Batteries will not reach full charge the first time they are charged. Allow several
cycles (working followed by recharging) for the item to fully charge. The battery should
only be used indoors.
After normal usage, about one hour of charging time is required for the battery to
be fully charged.
Do not place the charger in an area of extreme heat or cold. It operates best at
room temperature.
Charging Indication
The charger has two LEDs (red and green).
Push the battery pack to make sure the contacts on the
battery pack engage properly with the contacts in the charger.
When it is properly connected, the red light will illuminate.
When the battery is charged, the red light will go out
automatically and the green light will be lit.
REMOVAL/INSERTION OF BATTERY
To remove the battery, press the battery release latches
on the side of the battery and pull the battery pack out at
the same time.
To insert the battery, push the battery pack onto the
contacts, without using force, until it engages.

PRODUCT OVERVIEW

1. Chuck
2. 23+1 torque setting
3. Two speed selector
4. Direction of rotation selector
5. Soft grip
6. Battery pack
7. Drill storage groove
8. Latch
9. ON/OFF switch
10. Assist handle
5