DAPAudio DS-CDJ-250 MKII Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DAPAudio DS-CDJ-250 MKII. DAPAudio DS-CDJ-250 MKII 19 pagina's. Audio mixer
Ook voor DAPAudio DS-CDJ-250 MKII: Producthandleiding (20 pagina's)
Pagina afdrukken
Installation
Remove all packing materials from the CD Player. Check that all foam and plastic padding is removed..
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connections
1. Turn off the Power switch.
2. Connect the DS-CDJ-250 MKII to your amplifier using the proper cables.
CAUTION: Be sure that the power is off, when connecting the cables.
NAMES AND FUNCTIONS
Below is a description of the functions of the controls.
CD-player Functions
1. USB slot
Allows the connection of a USB stick with a maximum capacity of 4Gb.
2. CD/USB/SD
Indicate which source is selected for playback.
3. CD/USB/SD Button
Use this button to switch between the CD player, the USB slot or the SD slot. Selection is
indicated by the CD LED, the USB LED or the SD LED.
4. Loop IN:
Press this button to set the startpoint of the loop.
5. FLD/TRK search control
Depending on track or folder mode, you can use the encoder to select a certain track or folder.
Confirm by pressing the encoder.
6. Loop OUT:
Press this button to set the endpoint of the loop.
7. Reloop:
This button is used to start the last saved loop. To finish the loop, press the Reloop button again.
8. Shuttle Wheel:
In search mode the shuttle wheel can be used to search forward or backwards in the music track, as
well as fine tuning the cue point in pause mode. In pitch bend mode the shuttle wheel will function
the same as the pitch bend allowing you to speed up (forward) or slow down (rewind). In Scratch
mode the shuttle wheel can be used for scrathing effects.
9. LCD Display
10. Cue:
Press the Cue button during playback to return to the position at which playback is started.
11. Play/Pause-button
Use this button to start playback. Press once to start playback, twice to set the pause mode, press
again to resume playback.
12. Time:
Press this button to switch the Time-Display between the elapsed time and remaining time. The
selected mod e is ind ic a ted b y the ELAPSED and REMAIN indicator on the LCD.
13. Single:
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, the unit stops playing after each track. In CONTINUOUS mode,
the unit plays all tracks and then stops.
:
9