DAQ system PCI-DIO02 Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DAQ system PCI-DIO02. DAQ system PCI-DIO02 14 pagina's.
Pagina afdrukken
No.
Name
1
Model No
2
Board No
3
Open Device
4
List Device
5
Direction
6
Digital Input
7
Digital Output
8
Finish
Description
Select the Model Name
Select the Board Number
Open the selected Board
It displays a board number which installed in a
system.
Select Read / Write
8bit each bit
'0' : Read
'1' : Write
The lowest bit is 0~15 group setup.
The most bit is 112~127 group setup.
Input confirm by each 16bits group
It confirms an input value of group when "Read"
button click.
When "Auto DIN Read" checks, if input is
confirmed, it can just confirm it.
Output confirm by each 16bits group
If "Read" button click, it display the "Write" value.
If "Write" button click, it write at port.
When "Auto DOUT Test" checks, it will write in
order on data about groups set up to output.
It will finish the application program.
13-
-
PCI-DIO02 Users Manual (Rev 1.0)
Note
PCI-DIO02 selection
By SW1 Setup
Not Used currently.
Select it in 16bits unit
"Read All" will confirm
the all input groups.
"Write All" will confirm
the all output groups.
http://www.daqsystem.com