Duratuf D3 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Duratuf D3. Duratuf D3 20 pagina's. Roller door opener

WARNING: DO NOT ALLOW CHILDREN/PERSONS

AROUND THE DOOR AND PROP. SERIOUS PERSONAL

INJURY AND/OR PROPERTY DAMAGE CAN RESULT

FROM FAILURE TO FOLLOW THIS WARNING

Carefully loosen and remove the right hand door shaft

U-bolt.

Make sure that the door supporting prop is secure.

While the door is supported remove the right hand

door mounting bracket from wall.

Remove the drive assembly from the packaging. Try to

rotate the drive gear by pushing on the fork (Fig. 6). If

the gear does not rotate the manual mode has to be

selected. To select pull downward the manual release

lever. The drive gear should now rotate freely.

Slide the drive assembly over the door axle making

sure that the fork extends into and over one of the

spokes of the door drum wheel.

Refit the door mounting bracket to the wall. In some

cases the bracket may have to be re-positioned. Re-fit

and tighten the door shaft U-bolt. Remove door

supporting prop and untie the rope from the curtain.

Straighten the drive assembly and position as per Fig.

5. Tighten the two locking bolts firmly to secure the

operator.

10. Check the manual operation of the door by raising and

lowering the door. The door should run smoothly.

NOTE: After installation, ensure that parts do not extend

over public footpaths or roads．