Addonics Technologies NASU2 Handleiding voor snelle installatie

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Addonics Technologies NASU2. Addonics Technologies NASU2 4 pagina's. Nas adapter
Ook voor Addonics Technologies NASU2: Gebruikershandleiding (15 pagina's), Gebruikershandleiding (8 pagina's)

Pagina afdrukken

Addonics

T E C H N O L O G I E S

NAS Adapter

Model: NASU2

Quick Install Guide

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may c ause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

For more detailed information on setting up the NAS adapter, refer to the

User Manual located on the CD that came with the device.

The NAS adapter is a flexible, economical and powerful unit for your Network.

Follow the instructions to help you connect, setup, and configure it.

Note:

Any external USB storage device that you connect to the NAS adapter

will initially be required to be formatted. This means, if you are

connecting an external USB drive with data on it, the hard drive will be

formatted erasing all the information.

Network Environment

There are 3 different setup conditions you can choose:

A. Setup NAS Adapter as a DHCP Client:

If your NAS adapter is connected to a LAN network with an active DHCP

server, it will obtain an IP address from DHCP server automatically.

B. Setup NAS Adapter as DHCP Server:

If your LAN network does not have an active DHCP server, NAS adapter will

immediately act as DHCP server and assign itself an IP address for

installation.

C. Setup NAS Adapter in Static IP environment:

You need first configure the IP address for NAS adapter to operate in the

static IP environment. For Configuring details, please refer to "IP Config"

setup page.

2.0

NAS Adapter Hardware Installation

Connections:

Connect external USB Storage device into USB port of the NAS

Adapter. Power on the USB Storage device.

Connect LAN cable via LAN switch and Router.

Connect 5V power adapter to power up the NAS adapter

NAS Adapter connected directly to a computer's NIC card

If you connect the NAS adapter to a computer directly, the adapter will act as a

DHCP server, assigning itself an IP address automatically and also will assign an

IP address to the computer's network card. This configuration will not enable you

to see the drive on the network.