Contemporary Research ICC1-IR Producthandleiding - Pagina 6
Blader online of download pdf Producthandleiding voor {categorie_naam} Contemporary Research ICC1-IR. Contemporary Research ICC1-IR 17 pagina's. Ir tv controller, 1-way rf coax control
Ook voor Contemporary Research ICC1-IR: Specificaties (2 pagina's)
Pagina afdrukken
Installation
Setting IR Control Codes (IR Type Mode)
The DIP switches S1 and S1 at the bottom of the ICC1-IR serve in two modes, IR Type, Channel Entry and Device
Number, determined by S2 Switch 6 and S2 Switch 5. In this section, you'll set up the manufacturer's IR codes sent
from the IR Out port. These may have been set at the factory, or you'll need to set them yourself.
1.
Apply DC power to the ICC1-IR.
2.
If the unit's device number has already been set, note the current settings for S1 switches 1-8 and S2 switches
1-4.
3.
Set S2 Switch 6 to ON.
4.
Look at the IR Control Code chart on next page and select the desired value.
5.
Set S1 Switches 1 – 6 to match the value. For example to select the Sony codes,
turn on S1 switches 1 and 3, adding up to 5 to match the value in the Manufacturer IR chart below.
6.
Set S1 Switch 7 to On if you want the unit to ignore the power sensor input
7.
Set S1 Switch 8 to OFF for toggling Power On/Off command typical for most TVs. (There are a few international
TVs that use Key 1 for Power On)
8.
Set S1 Switch 8 and S2 Switch 6 to OFF. (See Channel Entry option below)
9.
If unit's device number had been set before, return S1 switches 1-8 and S2 switches 1-4 to previous positions.
S1
1
2
3
4
5
6
7
8
S2
1
2
3
4
5
6
7
8
Modify Channel Entry: Turning on S2 Switch 5 and 6 allows modification of the Channel Entry mode.
1.
Leaving Switch 6 on, Turn on S2 Switch 5.
2.
Set Switches 1-8 to set alternate method of channel enter (see T3 command, page 10).
3.
Turn S2 Switch 6 off first (important!), and then reset Switch 5 and other switches.
Contemporary Research
Off Value
0
0
0
0
0
0
0 - Use Power Sensor
0 - Toggle power
Channel Entry Off
Device Number Mode
On Value
1
2
4
8
16
32
64 - Ignore Pwr Sensor
128 - Key 1 = Power On
Modify Channel Entry
IR Type Mode
6
ICC1-IR IR TV Controller