493K K-METRON Gebruiksaanwijzing - Pagina 16
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 493K K-METRON. 493K K-METRON 18 pagina's. Thickness measurement gauge with radio link up and software recording
Pagina afdrukken7.1 Materials that can be measured.
Non-ferrous materials of any density will return an accurate reading within the limits of the
device. Materials that can be measured include all non-ferrous materials such as:
• Plastics of any density or composition
• Foamed materials
• Laminates
• Fibreglass
• Carbon Composites
• Glass
• Aluminium
• Brass and copper
7.2 Measuring Non-ferrous Metal Parts.
When measuring the thickness of non-ferrous metal parts ensure that there is no
movement of the magnet during the measurement. The figure of 8 movement for these
materials should be made to centre the magnet to the sensor head but should be stopped
once centred and before the measurement is taken.
7.3 Materials that Cannot be Measured.
The unit cannot be used to measure any kind of ferrous materials, e.g. steels & irons.
8 WHAT'S INCLUDED
The system comprises:
1. A portable display unit containing the measurement electronics;
2. A Lithium PP3 9volt battery;
3. Sensor Head with lead attached to the display unit;
4. 2 x spherical 10mm magnets;
5. 1 x 10mm cube magnet with retrieval cord;
6. Magnetic telescopic pick up tool;
7. 1mm - 20mm Calibration Steps;
8. Instruction Manual;
9. K-METRON Software (downloaded via link supplied);
10. 493K carry bag.
15 |
P a g e
K-METRON Radio User Instructions (Firmware 2.3.4; Doc v3.0.0)