4B ADBT2 Bedieningshandleiding - Pagina 12

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} 4B ADBT2. 4B ADBT2 16 pagina's. Adjustable depth bearing sensor temperature tester

Pagina afdrukken

FAULT

LED Display not Functioning

Testing Temperature Set

Buttons not Working

Battery Low Light Indicator /

Heater Block not Warming

ADB Sensor not Responding

as Expected to Testing

TROUBLESHOOTING GUIDE

Replace 9 Volt batteries.

Turn ADBT off and try again, if buttons are still not functioning

replace 9 volt batteries.

Replace AA batteries.

1. Make sure the ADB sensor probe is securely inserted all the way

into the tester's heater block.

2. Check alarm and shut down settings on control unit.

3. Replace ADB sensor and re-test. If sensor is still not responding

as expected, contact 4B.

PAGE 12

REMEDY