4B P3003V34AI Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} 4B P3003V34AI. 4B P3003V34AI 16 pagina's. Inductive proximity sensor

Pagina afdrukken
FAULT
LED Stays "ON"
LED Stays "OFF"

TROUBLESHOOTING GUIDE

•
Check that the sensing face of the sensor is not bolted directly to metalwork
•
Check that there is a space between the sensor face and any surrounding
metalwork (30mm minimum)
•
Check that the machinery is rotating and that the target is actually leaving the
sensor before reappearing
•
Check that background metalwork, behind target, is far enough away so as
not to be detected
•
Check supply voltage to the sensor.
•
Check that target is within specified operating range of unit.
•
Check that machinery is rotating and that target is passing the sensing face
of the sensor.
REMEDY
PAGE 13