4B Touchswitch Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} 4B Touchswitch. 4B Touchswitch 20 pagina's. Belt misalignment sensor

The following are guidelines and suggestions for installing Touchswitches. The installer must take

responsibly that the Touchswitches are mounted in a position to be able to detect a belt misalignment

condition and or a pulley misalignment condition, whichever it may be. Typical Touchswitch™ mounting

positions are illustrated on pages 10 - 15.

The Touchswitch™ hole should be cut into the housing with a 57mm diameter hole saw (Image A),

centered on the edge of the belt. The hole should be cleaned and de-burred to avoid the Touchswitch™

puck binding and giving false misalignment alarms. You can mount the Touchswitch™ with 2 of the 4

flange holes, provided they are diagonal from one another. The enclosed flange shims can be used as a

template to properly place the flange holes. The Touchswitch™ needs to be mounted on a flat surface,

preferably with the conduit entrance between the 3 to 9 o'clock position to minimize the entrance of water.

The Touchswitch™ can be mounted using one of the following three methods -

1. Drill and tap the machine casing for 6mm threaded bolts. Make sure that the bolts used to secure the

Touchswitch™ are short enough that they do not interfere with the operation of the machine.

2. Use threaded rivet nuts for 6mm threads. The length of the rivet nut will depend on the thickness of t he

machine's casing. Make sure that the bolts used to secure the Touchswitch™ are short enough t hat

they do not interfere with the operation of the machine.

3. CD weld 6mmx32mm threaded welding studs to the machine casing.

When placing flange shims on Touchswitch™ make certain belt and or pulley contacts the Touchswitch™

face before it can contact any internal surface of leg or conveyor housing. It is best not to be any further

away from the pulley than 32mm to 38mm to the face of the Touchswitch™.

DIMENSIONS

PAGE 7