AEZ GCM02 Handmatig - Pagina 6
Blader online of download pdf Handmatig voor {categorie_naam} AEZ GCM02. AEZ GCM02 12 pagina's. Automatic microprocessor control panel for stand-by generator
Pagina afdrukken
1.4 FUNCTIONAL DESCRIPTION OF THE GC MO2 CONTROL PANEL
COMPONENTS
1
2
3
4
5
6
GCM02-M-USO-INGLESE.doc
Description of the components.
Programming switch.
Type of operational mode selection
Display reading selection push buttons.
These are used to select the reading page required and to
program the weekly timer.
Reset/Enter push button: resetting of the functions and
elimination of alarm status , confirms parameters entered in
the programming phase.
alarm, 2 impulses to reset.
DESCRIPTION OF MEASUREMENT PAGES
When the mains power is connected these values are
automatically displayed .They shows the mains voltage and
frequency.
The three voltages values (one per phase) between one
phase and another are displayed for a detailed control of the
mains.
and the three star voltages between phase and neutral
When the generator starts running, the display will
automatically show the measurements such as frequency,
voltage and current on phase 1, relative to the generator.
FILE
1. Automatic test (T)
2. Standard automatic running (A)
3. Locked status – electronics disabled, used for
maintenance.
4. Utility power supply forced from mains (CR).
5. Enable start push button to start in manual mode.
6. Utility power supply forced from generator (CG).
An impulse cut out the acoustic
VER
LAST ISSUE
SDG/02
18/11/2005
LANG.
PAGE
ENG
Page 6 of 12