Aplisens PCE-28 Ex Safety Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aplisens PCE-28 Ex Safety. Aplisens PCE-28 Ex Safety 20 pagina's. Pressure transmitters
Pagina afdrukken
Symbols used
Symbol
Warning to proceed strictly in accordance with the information contained in the
documentation in order to ensure the safety and full functionality of the device
Information particularly useful during installation and operation of the device
Information particularly useful during installation and operation of Ex
versions
Information on disposal of used equipment
BASIC REQUIREMENTS AND SAFE USE
In order to minimise the risk of malfunction and associated risks to personnel, the
device is not to be installed or used in particularly hostile conditions, where the
following risks occur:
When using the device in potentially explosive areas, observe technical
requirements specified in this manual and applicable local (national) regulations
Changes in the manufacture of transmitters can overtake the update's paper documentation.
Current manuals can be found on the manufacturer's website at
The manufacturer will not be liable for damage resulting from incorrect
installation, failure to maintain the device in a suitably functional condition, or
use of the device other than for its intended purpose.
Installation should be carried out by qualified personnel having the necessary
authorisation to install electrical and pressure measuring devices. The
installer is responsible for performing the installation in accordance with these
instructions and with the electromagnetic compatibility and safety regulations
and standards applicable to the type of installation.
In the installation with control and measurement instruments exists, in case of
leakage, a risk to personnel on the side where the medium is under pressure.
All safety and protection requirements must be observed during installation,
operation and inspections.
If a device is not functioning correctly, disconnect it and send it for repair to
the manufacturer or to a firm authorised by the manufacturer.
Possibility of mechanical impacts, excessive shocks and vibration;
Excessive temperature fluctuation;
Condensation of water vapour, dust, icing.
Description
www.aplisens.com
.