Aplisens SGE-16 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aplisens SGE-16. Aplisens SGE-16 16 pagina's. Hydrostatic level probes
Ook voor Aplisens SGE-16: Gebruikershandleiding (20 pagina's)

Pagina afdrukken
Aplisens SGE-16 Gebruikershandleiding
Symbols used
Symbol
Warning to proceed strictly in accordance with the information contained in the
documentation in order to ensure the safety and full functionality of the device.
Information particularly useful during installation and operation of the device.
Information particularly useful during installation and operation of an Ex type device.
Information on disposal of used equipment.
The manufacturer will not be liable for damage resulting from incorrect installation,
failure to maintain a suitable technical condition of the device or use of the device
other than for its intended purpose.
Installation should be carried out by qualified staff having the required authorizations
to install electrical and I&C equipment. The installer is responsible for performing
the installation in accordance with manual as well as with the electromagnetic
compatibility and safety regulations and standards applicable to the type of
installation.
In systems with I&C equipment, in case of leakage, there is a danger to staff due to
the medium under pressure. All safety and protection requirements must be
observed during installation, operation and inspections.
If a malfunction occurs, the device should be disconnected and handed over to the
manufacturer for repair.
In order to minimize the risk of malfunction and associated risks to staff, the device
is not to be installed or used in particularly unfavourable conditions, where the fol-
lowing hazards occur:
Changes made to the manufacturing of products may be introduced before the paper version of the
manual is updated. The up-to-date manuals are available on the manufacturer's website:
www.aplisens.com
BASIC REQUIREMENTS AND SAFE USED
− possible mechanical impacts, excessive shocks and vibration;
− excessive temperature fluctuation;
− freezing of the medium
Description