Aplus DA-6 5 Gebruiksaanwijzing en onderdelenhandleiding - Pagina 3

Blader online of download pdf Gebruiksaanwijzing en onderdelenhandleiding voor {categorie_naam} Aplus DA-6 5. Aplus DA-6 5 5 pagina's. Angle nailer

Pagina afdrukken

TOOL SPECIFICATIONS

MODEL OF TOOL .................................................................. DA-65

TOOL LENGTH ....................................................................... 13.39" (340 mm)

TOOL HEIGHT ........................................................................ 12.2" (310 mm)

TOOL WIDTH .......................................................................... 3.62" (92 mm)

WEIGHT (WITHOUT FASTENERS) ......................................4.41 lbs (2 kg)

AIR INLET ............................................................................... 1/4" NPT

COMPRESSED AIR :

Maximum permissible operating pressure ............................. 115 PSIG (8 bar)

Recommended operating pressure range ............................. 65 ~ 110 PSIG (4.5 ~ 7.5 bar)

AIR CONSUMPTION.............................................................. 0.0449 scfm with 25

Noise dB(A)：

A-weighted sound pressure level LpA.............................. 85.38 dB(A)

A-weighted sound power level LwA................................. 98.38 dB(A)

Measurement uncertainty: 3dB

Vibration (m/s

)：

Hand-arm vibration value.............................................. 3.15 m/s

Measurement uncertainty: 1.5 m/s

Warning:

The vibration emission during actual use of the power tool can differ from the declared total

value depending on the ways in which the tool is used; and of the need to identify safety

measures to protect the operator that are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the operation cycle such as the times when

the tool is switched off and when it is running idle in addition to the trigger time).

List of fasteners for DA-65：

Crown

Thickness

3.2 mm , 0.13 "

1.8 mm , 0.07 "

door/window assembly, hardwood flooring, paneling and trim. Picture/mirror frames. Sub-

flooring and many more.... This electric tool is restricted to using on wood, wood like

products, leather and material of paper. Any other material is forbidden.

Caution:

Not suitable for stapling or nailing into concrete, masonry bricks or steel. Do not fire if nails

are jammed, as this will cause damage to the driver blade.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING

Indicates an potentially hazardous situation which, if not avoided, will result in death or

serious injury.

NOTE

Alerts the operator to useful information.

SAFETY INSTRUCTIONS

1. Read this manual and understand all safety instructions before operation the tool. If you

have any questions, please contact our authorized representatives.

2. Only those fasteners listed in the operating instructions may be used in the fastener driv-

ing tools.

3. Only the main energy and the lubricants listed in the operating instructions may be used.

4. Fastener driving tools marked with an inverted equilateral triangle standing on one point

may only be used with an effective safety yoke.

5. Fastener driving tools equipped with contact actuation or continuous contact actuation,

marked with the symbol " Do not use on scaffoldings, ladders", shall not be used for spe-

cific application for example:

─when changing one driving location to another involves the use of scaffoldings, stairs,

ladders, or ladder alike constructions, e.g. roof laths,

─closing boxes or crates,

─fitting transportation safety systems e.g. on vehicles and wagons.

6. For the maintenance of fastener driving tools, only spare parts specified by the manufac-

nails per minute

@ 100 psi (6.9 bar)

Width

MAGAZINE

1.8 mm , 0.07 "

100 pcs

Foreword:

This pneumatic stapler is designed for moulding,

hobbies and most other jobs requiring a hammer.

Its well balanced, ergonomic, comfort non-slip

cushioned grip and heavy duty driving compatible

staples to proper applications. Features long

protruding nose to nail/staple into tight

corners/groves, easy loading magazine are exactly

what master needed. No more painful hammering

and ensure you as satisfactory tackle and enjoy

work.

Suitable applications:

Wood and wood like applications, MDF,

Hobby/Craft, fine decorative trim, beading and

moulding. Tongue & Groove paneling. Cabinet and

plywood assembly, garden furniture and trellis work,

DANGER

turer or his authorized representative shall be used.

7. Repairs shall carried out by agents authorized by the manufacturer or by other specialis-

ts, having due regard to the information given in the operating instruction.

8. Stands for mounting the fastener driving tools to a support for example a work table shall

be designed and constructed by the stand manufacturer in such a way that the fastener

driving tool can be safely fixed for the intended use, thus for example avoiding damage,

distortion or displacement.

9. Fastener driving tools operated by compressed air shall only be connected to compress-

ed air lines where the maximum allowable pressure cannot be exceed by a factor of

more than 10%, which can for example be achieved by a pressure reduction valve

which includes a downstream safety valve.

10. When using fastener driving tools operated by compressed air, particular attention must

be paid to avoid exceeding the maximum allowable pressure.

11. When using fastener driving tools operated by compressed air should only be operated

at the lowest pressure required for the work process at hand, in order to prevent unnece-

ssarily high noise levels, increased wear and resulting failures.

12. Hazards caused by fire and explosion when using oxygen or combustible gases for ope-

rating compressed air operated fastener driving tools.

13. Carry the fastener driving tool at workpiece using only the handgrip, and never with the

trigger actuated. Never carry the tool by the hose or pull the hose to move the tool.

14. Disconnect the tool from air supply before cleaning jams,

servicing, adjusting, and during non-operation.

15. Wear eye protection.

16. Do not use a check valve or any other fitting which allows

air to remain in the tool.

17. Do not place your hand or any part of your body in the

fastener discharge area of the tool when connecting or

disconnecting air supply.

18. Never point tool at yourself or at any other person.

19. Do not use on scaffoldings, ladders.

AIR SUPPLY AND CONNECTION

‧Many air tool users find it convenient to use oiler to help provide oil

circulation through tool and increase the efficiency and useful life of

the tool. Check oil level in the oiler daily.

‧Many air tool user find it convenient to use a filter to remove liquid

and impurities which can rust or wear internal parts of the tool. A

filter also increase the efficiency and useful of the tool. The filter

must be checked on a daily basis and if necessary drained.

‧For better performance, install a 3/8" quick connector (1/4" NPT

threads) with an inside diameter of .315" on your tool and a 3/8"

quick coupler on the air hose.

The following illustration shows the correct mode of connection to the air

supply system which will increase the efficiency and useful life of the tool.

LUBRICATION AND MAINTENANCE

‧Disconnect the air supply from the tool before lubricating.

‧Your tool requires lubrication before you use it for the first time.

‧Wipe off excessive oil at the exhaust. Excessive oil will damage

O-rings of tool. If in-line oiler is used, manual lubrication through the

air inlet is not required on a daily basis.

‧Turn the tool so the inlet is facing up and put one drop of high

speed spindle oil, UNOCAL RX22, or 3-IN-1 oil into air inlet. Never

use detergent oil or additives. Operate the tool briefly after adding

oil.

NOTE