APM OT-3G-08 Beknopte handleiding - Pagina 2
Blader online of download pdf Beknopte handleiding voor {categorie_naam} APM OT-3G-08. APM OT-3G-08 5 pagina's. 3g gnss tracker
Pagina afdrukken
5.
Fully charge the battery
The micro-USB connector is pointed by the red
arrow as shown below.
Connect micro-USB connector to GT-200 and
USB connector to a 5V USB power source.
Use USB 3.0 port if PC/NB.
Orange LED is ON during charging.
Orange LED is OFF as charging is done.
Battery low: orange LED blinks once every 5
seconds
8.
Speaker
9.
Internet Button for Setting
The internet button is pointed by the red arrow as
shown below.
The internet button is to connect to the Internet
for setting of the tracker from APPs.
Press the internet button by a thin pin.
Green LED blinks for 5 minutes after it is
pressed.
6.
SOS button
Pressing SOS button will make calls, send
SMS to preset phones , and send SOS
message to cloud.
As SOS is on-going, the orange and green
LEDs blink alternately.
This button could also be used to hang up
current call or pick up an incoming call.
7.
Microphone
10.
Install APP - helpYou24
Scan the QR code using your smartphone.
Open the scanned web, install the APP.
The installation of APP will be completed
within a few minutes.
SOS Button