Addonics Technologies RAID Tower IX RT93SDEU3 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Addonics Technologies RAID Tower IX RT93SDEU3. Addonics Technologies RAID Tower IX RT93SDEU3 5 pagina's.
Pagina afdrukkenInstalling drives into the
RAID Tower IX
1. Be sure the lock on each drive door is in an
unlock position. If not, use the key that comes
with the Disk Array to unlock the drive door. Pull
on the door lever to swing open the drive door all
the way.
2. Slide a 3.5" SATA hard drive into the drive slot
with the drive connector side facing in. Be sure to
orient the hard drive correctly as shown in the
yellow label on the inside of the drive door – with
drive door swing open at the bottom, the top of
the hard drive should face to the right. The drive
should slide all the way into the slot with very
little resistance. Forcing the drive into the slot
will cause drive damage or permanent
damage to the Disk Array.
3. Once the drive is all the way into the drive slot,
close the door all the way till the drive door latch
securely. This will engage power and data
connection with the hard drive. The LED lit for
the drive slot should lit if the Disk Array already
powered on. You may lock the drive door with the
key
4. To remove the hard drive from the Disk Array,
simply follow the step 2 – 3 in reverse.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Door Lock
Insert Hard Drives
with Top Facing Right
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Individual
Drive Bay
Door
Main Power
LED
Drive Power &
Activity LED
for each Drive Bay