Apogee SQ-627 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Apogee SQ-627. Apogee SQ-627 17 pagina's. Extended range pfd sensor

Apogee SQ-627 Gebruikershandleiding

SPECIFICATIONS

Input Voltage
Current Draw
Calibration Uncertainty
Measurement Range
Measurement
Repeatability
Calibrated Output Range
Long-term Drift
(Non-stability)
Non-linearity
Response Time
Field of View
Spectral Range
Directional (Cosine)
Response
Azimuth Error
Tilt Error
Temperature Response
Uncertainty in Daily Total
Housing
IP Rating
Operating Environment
Dimensions
Mass (with 5 m of cable)
Cable
Warranty
Calibration Traceability
Apogee Instruments SQ-600 series PFD sensors are calibrated through side-by-side comparison to the mean of four
transfer standard PFD sensors under a reference lamp. The transfer standard PFD sensors are recalibrated with a
quartz halogen lamp traceable to the National Institute of Standards and Technology (NIST).
± 5 % (see Calibration Traceability below)
0.6 s, time for detector signal to reach 95 % following a step change; fastest data transmission
340 to 1040 nm ± 5 nm (wavelengths where response is greater than 50 %; see Spectral
± 2 % at 45° zenith angle, ± 5 % at 75° zenith angle (see Directional Response below)
Anodized aluminum body with acrylic diffuser
-40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m
5 m of two conductor, shielded, twisted-pair wire; TPR jacket; pigtail lead wires; stainless steel
4 years against defects in materials and workmanship
SQ-627-SS
5.5 to 24 V DC
1.4 mA (quiescent), 1.8 mA (active)
-2
0 to 4000 µmol m
Less than 0.5 %
0 to 200 mV
Less than 2 % per year
Less than 1 % (up to 4000 µmol m
rate for SDI-12 circuitry is 1 s
180°
Response below)
Less than 0.5 %
Less than 0.5 %
-0.11 ± 0.04 % per C
Less than 5 %
IP68
30.5 mm diameter, 37 mm height
140 g
(316), M8 connector
-1
s
-2
s
-1
)