4D systems gen4-uLCD-24PT Aan de slag handleiding - Pagina 9

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} 4D systems gen4-uLCD-24PT. 4D systems gen4-uLCD-24PT 20 pagina's. Intelligent display modules

Pagina afdrukken

1. Getting Started with a Simple Project

6. Click on the COMMS tab, select the COM port the display module is

connected to from the dropdown list.

7. Click on the RED Dot to start scanning for the display module. A YELLOW

dot will show while scanning. Make sure that your module is connected

properly.

8. Lastly, a successful detection will give you a BLUE Dot with the name of

the display module shown alongside it.

9. Click on the Home tab to start creating your project.

gen4-uLCD-XXPT - GETTING STARTED MANUAL