Abus SHRM10000 Originele gebruiksaanwijzing - Pagina 5

Blader online of download pdf Originele gebruiksaanwijzing voor {categorie_naam} Abus SHRM10000. Abus SHRM10000 16 pagina's. Z-wave smoke detector

2.5. Information on handling batteries

Make sure that batteries are kept away from small children. Children may put

batteries in their mouths and swallow them. This can cause serious harm to their

health. If this happens, consult a doctor immediately.

Do not charge normal batteries, heat them up or throw them into naked flames

(they may explode).

The battery must not be directly exposed to heat or sunlight, and must not be

stored in a place with a very high temperature.

The battery must not come into contact with water.

The battery must not be dismantled, pierced or otherwise damaged.

The battery contacts must not be short-circuited.

Change low batteries in good time.

Always change all the batteries at the same time and use batteries of the same

type.

Leaky or damaged batteries can cause chemical burns on contact with the skin.

In this case, wear protective gloves. Clean the battery compartment with a dry

cloth.

Batteries with this label do not contain harmful substances such as

cadmium, lead and mercury. However, used batteries must not be

disposed of along with household waste in accordance with the battery

directive. To protect natural resources and promote the recycling of

materials, separate the batteries from other waste and deposit them at a

local recycling center. An additional label with the chemical symbols for

Hg, Cd or Pb means that the batteries contain quantities of mercury, cadmium or lead

which exceed the restrictions set by the EU Directive 2006/66/EG. If batteries are not

disposed of properly, these substances can cause harm to human health or the

environment

2.7.

In accordance with the German application standard DIN 14676, the functionality of

each installed smoke detector must be regularly checked and ensured by maintenance

measures.

This includes an inspection at least once every 12 ± 3 months including maintenance

and functional testing of the warning signals.

The results and measures must be documented accordingly.

Dusty detectors must be cleaned. Dust deposits in the air slots of the detector

can be sucked off or blown out.

If necessary, the dust can be removed with a brush.

The surface can be cleaned with a cloth slightly moistened with soapy water.

Make sure that no water gets inside the unit! Do not clean the appliance in the

dishwasher!

English