Dasan BT700-B Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dasan BT700-B. Dasan BT700-B 7 pagina's.

Headband adjustment

Adjust the headband to a comfortable fit by

sliding the headband up or down.

There are two different types of ear cushions

supplied with the product, leatherette and foam.

Turning the headset on and off

Turn on the headset

Press and hold the answer button for 2 seconds. Release the button when the LED

flashes green and a short beep is heard in the speaker.

Turn off the headset

Press and hold the answer button for 4 seconds. Release the button when the LED

flashes red 3 times.

Pairing

Prior to using the headset, it must be paired and connected to another Bluetooth

device, such as a mobile phone. For specific instructions, check the users guide of

your phone.

General procedure

Turn on Bluetooth on your phone

Put the headset in pairing mode (make sure the headset is switched off, press

and hold the answer button for 4-5 seconds until the LED flashes red and green)

Perform a search for Bluetooth devices on your phone.

Connect to >>device logo<< when found. The PIN code is 0000 (four zeros)

Different phones have different ways to handle Bluetooth devices. Read the users

manual of your phone for more info. Some phone for more info. Some phones will

connect to the headset automatically when it is within range, for example when you

return to your office. For other phones, it may be necessary to reconnect manually

when the connection has been broken.

The pairing mode is active for 3 minutes. After that, the headset will enter standby

mode.