Apogee Instruments SE-202 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Apogee Instruments SE-202. Apogee Instruments SE-202 18 pagina's. Photometric sensor

Pagina afdrukken

OPERATION AND MEASUREMENT

Connect the sensor to a measurement device (meter, datalogger, controller) capable of measuring and displaying

or recording a millivolt signal (an input measurement range of approximately 0-150 mV is required to cover the

entire range of illuminance from the sun). In order to maximize measurement resolution and signal-to-noise ratio,

the input range of the measurement device should closely match the output range of the quantum sensor. DO

NOT connect the sensor to a power source. The sensor is self-powered and applying voltage will damage the

sensor.

Wiring for SE-100

White: Output Signal

Black: Ground

Clear: Shield