Dashbon Flicks Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dashbon Flicks. Dashbon Flicks 11 pagina's.
Ook voor Dashbon Flicks: Snelstarthandleiding (10 pagina's)
Pagina afdrukkenUser´s Manual
Welcome
Thank you very much for purchasing this product. Before you start, you are
recommended to read this manual step by step to obtain the best results with your
new projector. We wish you enjoy it.
About the product
Flicks is a mobile party powerhouse bringing video and music to any environment. The
LED HD projector projects ultra‐bright and sharp pictures from a HDMI source. The
DLP chip in use, known from large cinema projectors, provides rich colors and high
contrasts. With an embedded rechargeable battery, Flicks is free from any power
source for real mobile presentations and movie nights. The 3‐ways speakers with
subwoofer are well balanced and powerful enough for your party. Enjoy movies or
music with Flicks wherever you are, free from a power source.
General safety information
Physical injury or damage to the device or loss of data can result from improper
handling.
SETTING UP THE DEVICE
The device should be placed securely on a stable, flat surface. Position all cables in
such a way that no one will stumble on them, thus avoiding possible injuries to
persons or damage to the device itself.
Do not plug in the device in moist rooms. Never touch the mains cable or the mains
connection with wet hands.
The device must have sufficient ventilation and may not be covered. Do not put your
device in closed cabinets or boxes.
Do not place the machine on soft surfaces such as tablecloths or carpets and do not
cover the ventilation slits. Otherwise the device could overheat or catch fire.
Protect the device against direct sunlight, heat, large temperature fluctuations and
moisture. Do not place the device in the vicinity of heaters or air conditioners.
Do not allow liquids to enter into the device. Switch off the device and disconnect it
from the mains supply if liquids or foreign substances end up inside the device. Have
the unit inspected by a technical service department.
Always handle the unit with care. Avoid touching the lens. Never place heavy or sharp
objects on the projector or the power cable.
If the projector gets too hot or emits smoke, shut it down immediately and unplug the
power cable. Arrange for your device to be investigated by a technical service centre.
To prevent the spread of fire, open flames should be kept away from the device.
Under the following conditions, a layer of moisture can appear inside the device which
can lead to malfunctions:
if the device is moved from a cold to a warm area
after a cold room is heated
when this device is placed in a damp room
Page 2