Apollo Spas Explorer Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Apollo Spas Explorer. Apollo Spas Explorer 20 pagina's.

Placement of your Apollo spa

Your spa must be properly situated and supported to ensure longevity of the cabinet, acrylic shell, and its compo-

nents. It is mandatory that your spa sit on a flat, hard, unitized surface that is level to within one inch over 8 feet

of a slope. Hard and unitized means that the surface must be a stable, tied together platform that will withstand

the rigors of use and your local climate extremes. Examples of the above would be: a 3.9" reinforced concrete pad,

a wood deck built to local building codes, or an engineered stage platform built to our Apollo Spa's standards. It is

important to note that when spas are placed on soft surfaces, or platforms that are not integrated, the ground may

settle. This leaves a void in the structural integrity of the platform and could cause damage to the spa shell, cabinet

or structure. This damage is not covered by your Limited Warranty. Contact your local Apollo Spas outlet with

any concerns or questions before installing your Apollo spa.

Wood decking requires that the deck be constructed to support at least 100 pounds per square foot. Individual spa

weights vary.

Check with your Apollo Spas outlet for specific model weights. You may also use the chart on page 7 for your

model's estimated average weight.

Equipment Panels and Access

When considering an installation site, always allow for a minimum of 30" of clearance for the front equipment

panel. It is also recommended to allow at least 20" of minimum clearance for the remaining sides. Contact your

local Apollo Spa outlet for further information when enclosing or recessing your spa.