Apollo Sprayers MOBILE MIST T100-S Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Apollo Sprayers MOBILE MIST T100-S. Apollo Sprayers MOBILE MIST T100-S 13 pagina's. Tanning system

Pagina afdrukken

a. Unscrew the plastic cup from the Mist Applicator™. Pour tanning solution into the cup. Do not fill more than ¾

full.

b. Carefully screw the cup back onto the main body of the Mist Applicator™. Screw the cup on firmly but DO NOT

over tighten. Over tightening will cause the cup to "pop" and damage the threads. Leakage can then occur

requiring replacement of the cup.

c. Locate the air cap (#2) on the T6000 diagram. Slightly turn the air cap ring (#1) anti or counter clockwise to

loosen the air cap. Notice that you can now rotate the air cap freely.

d. Look at Mist Applicator Patterns diagram below. Note the position of the air cap and the direction of the spray

pattern. Pattern 1 is for spraying across from side to side. Pattern 2 is for spraying up and down. Pattern 3 will

produce a spot or circle. Patterns 1 and 2 are the most common positions for applying tanning solutions.

e. Turn the air cap (#2) to the position you want. Turn the air cap ring (#1) clockwise to lock the air cap in place.

MIST APPLICATOR™ PATTERNS

Misting across from side to side

Misting up and down.

Misting in a spot or circle

2. Next, position the Mobile Mist™ Turbo Unit as far away as practical and possible from the area where you will

spray.

3. Attach the remaining end of the hose to the T6000 Mist Applicator™ as follows:

d. Locate the coupler at the rear top of the T6000 Mist Applicator™. See T6000 diagram.

e. Pull back on the collar of the black connector on the air hose.

f. Push the connector over the coupler and release. Figure 7.

g. Your Mist Applicator™ should now be firmly attached to the air hose.

1. Follow the diagram to prepare the Mist Applicator™