Data EOC Master CD7944N Gebruikershandleiding voor het product - Pagina 16
Blader online of download pdf Gebruikershandleiding voor het product voor {categorie_naam} Data EOC Master CD7944N. Data EOC Master CD7944N 18 pagina's. Device install guide
Pagina afdrukken
2.6 EOC Master Login Method
This equipment does not have out-band management port. By default, it only supports
in-band management. There are two ways to login the device WEB interface. One is to
access EOC master WEB from the front-end equipment(such as OLT, server, etc.) of the
optical node. The other is to access the EOC master WEB from the EOC slave LAN side.
See the following chapters for details:
2.6.1 Default Network Parameters
1.
In-band management port default IP address:
IP address：192.168.1.6
Subnet mask：255.255.255.0
2.
WEB default login username and password
Username: admin
Password: admin
2.6.2 Access EOC Master WEB Method
2.6.2.1 From EOC Slave LAN Side Access
The figure below is a networking diagram of accessing EOC master WEB from the LAN
side of the EOC slave. According to the diagram, the PC is connected to the LAN port of
the EOC slave, and configure the same network segment IP address as in-band
management IP of EOC master to ensure that the PC can ping through EOC master.
Access the EOC master WEB and make related configurations. This method is mostly
used for local management or client side location problem.
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
14